PTX Validated end-to-end across the full set of real production jobs. PTX round-trips head cuts and mixed-rotation layouts.
Getestete Modelle (1)
- Sawteq B-130/160/300/320 (4300 × 2250 mm bed)
Sägen-Unterstützung
Die Postprozessor-Pipeline von SmartCut konvertiert einen optimierten Schnittplan direkt in das von Ihrer Säge erwartete CNC-Format – ohne manuelle Übertragung und ohne Zwischensoftware. Die Kernformate werden durchgängig an echter Säge-Hardware validiert, sodass die Datei, die SmartCut verlässt, exakt die Datei ist, die Ihre Säge ausführt.
Funktionsmatrix
Jedes Format wird gegen die maschineneigene Steuerungssoftware und, wo möglich, an echter Hardware validiert. Bevor es an Ihre Maschine geht, wird es anhand einer Bibliothek realer Produktionsaufträge auf geometrische Genauigkeit geprüft.
| Saw / software | Vendor | Format | Status |
|---|---|---|---|
| Holzma / Sawteq | Homag | PTX | Validated |
| Homag CPOUT | Homag | CPOUT | Beta |
| CADmatic 3 / 4 / 5 | Homag | .saw (PTN3) | Beta |
| OptiPlanner (Beam saw) | Biesse | Biesse XML (Str) | Validated |
| Selco WN series | Biesse | Biesse XML (Str) | Validated |
| PC5100 / PC7000 | Mayer | .may | Validated |
| Pratika | SCM | Biesse XML (Str) | Beta |
| SCM Link | SCM | .900 | Beta |
| Commander 4 (MCS) | Schelling | .nc | Beta |
| Commander 2 | Schelling | .002 | Beta |
| G-Drive | Giben | .ac | Beta |
| Vertical panel saw (IST PIOS) | Striebig | CSV (ZuschnittOpti) | Beta |
| Jingwei (CNC cutting table) | Jingwei | CNC XML | Active use |
Validiert End-to-End-CNC-Datei in der Produktion, die von der maschineneigenen Software für einen kompletten Satz realer Aufträge akzeptiert wird. Aktiv im Einsatz In der Produktion mit Live-Kundenverkehr. Beta Format implementiert und getestet, Abnahme an realer Maschine in Arbeit.
Herstellerdetails
PTX Validated end-to-end across the full set of real production jobs. PTX round-trips head cuts and mixed-rotation layouts.
CPOUT CPOUT cut-sequence export for Homag panel saws.
.saw (PTN3) PTN3 format for Homag CADmatic controllers.
Biesse XML (Str) Verified on 15 Selco WN6/WN7 saw configurations.
Biesse XML (Str) Uses the same Biesse XML output as OptiPlanner, with Selco-specific defaults.
.may Validated end-to-end against Mayer PC5100 reference files. Bed envelope: 4500 × 2200 mm.
Biesse XML (Str) Uses the validated Biesse XML output with SCM-specific defaults (4.8 mm kerf).
.900 Positional record format for SCM saw-link software.
.nc .nc output for Schelling Commander 4 (MCS) saws.
.002 Output for older Schelling Commander 2 saws.
.ac .ac output for Giben G-Drive saws.
CSV (ZuschnittOpti) IST PIOS CSV import for Striebig vertical saws. Cut length ≤ 9800 mm, board height ≤ 2100 mm.
CNC XML Continuous-roll contour cutter for roll-stock and sheet materials. In active customer use.
FAQ
SmartCut exportiert CNC-Dateien für über 13 Plattenaufteilsägen-Modelle von acht Herstellern: Homag (PTX, CADmatic und CPOUT), Biesse OptiPlanner und Selco, Mayer, SCM, Schelling Commander, Giben, Striebig und Jingwei.
Das hängt von der Maschine ab. Homag verwendet PTX, Biesse und SCM nutzen Biesse XML, Mayer nutzt .may und Schelling nutzt .nc. SmartCut gibt automatisch das richtige Format basierend auf dem optimierten Layout aus. In der obigen Tabelle ist das Format für jedes Modell aufgeführt.
Ja. Neue Formate werden über einen strukturierten Validierungsprozess hinzugefügt. Kontaktieren Sie uns, da wir möglicherweise bereits einen Prototyp haben oder ein Projekt zur Formatentwicklung planen können.
Ja. Jedes Format wird gegen die maschineneigene Steuerungssoftware validiert, einschließlich Geometrie- und Genauigkeitsprüfungen anhand einer Bibliothek realer Produktionsaufträge, bevor es an eine Maschine geht.
Ihre Säge fehlt?
Neue Sägeformate werden über einen strukturierten Validierungsprozess hinzugefügt. Wenn Sie ein Format benötigen, das nicht aufgeführt ist, setzen Sie sich mit uns in Verbindung. Wir haben eventuell bereits einen Prototyp oder können ein Entwicklungsprojekt definieren.